Scope
Purpose first
We confirm what the report must support: an EPA submission, a buyer audit, an internal check. That decides parameters, sampling and the standard the results are read against.
PNAC ISO/IEC 17025·LAB-285 Karachi·LAB-347 Lahore
Environmental analysis you can defend.
Analytical testing support for industrial, commercial, healthcare, hospitality, maritime, and facility teams that need defensible environmental results.
Accreditation
ISO/IEC 17025
PNAC, for methods within the approved scope
Karachi
LAB-285
Bahadurabad laboratory and field team
Lahore
LAB-347
Johar Town laboratory and field team
Every report
Verifiable online
By report number and issue date
Sample to report
Five controlled steps between a sample and a signature.
Sample
Chain of custody
Field sampling by our team or receipt of your samples, with preservation, labelling and custody records kept from the first container to the bench.
Analyse
Accredited methods
Analysis on methods within the relevant PNAC ISO/IEC 17025 approved scope, with calibration, blanks and duplicates run as the method requires.
Review
Technical sign-off
Results are reviewed against the method and the specified standard before anything is released.
Report
Defensible document
A numbered report with the method, the limit, the result and the reviewer, verifiable online by number and issue date.
What we measure
Three sample streams, one reporting standard.
Parameters below are indicative. The final list is confirmed against the standard your report must satisfy, and accreditation applies to methods within the relevant approved scope.
W
SEQS · PEQS · NEQS · WHO
Water and wastewater
Drinking, process, bore, effluent and discharge samples.
- pH
- TDS
- TSS
- BOD
- COD
- Oil and grease
- Heavy metals
- Microbiological indicators
A
SEQS · PEQS · NEQS
Air and emissions
Stack, ambient and workplace air, with field instruments where the scope needs them.
- Stack emission parameters
- Ambient air indicators
- Particulate matter
- Combustion gases
- Workplace exposure indicators
S
Method and client specification
Soil, waste and industrial samples
Soil, sludge, hazardous waste screening and process-specific matrices.
- Heavy metals
- Moisture
- Organic/inorganic indicators
- Hazardous waste screening
- Process-specific parameters
Complete testing scope
Every environmental testing and monitoring service, in one place.
The laboratory page is the hub. Each service below has its own page with parameters, sample guidance and the standard it reports against.
Laboratory testing
Samples analysed in the Karachi and Lahore laboratories on methods within the relevant approved scope.
Field monitoring
Measured on site by the field team, with the instruments and custody records the report requires.
Calibration, compliance and advisory
The services that sit around the result: traceable instruments, the documents regulators ask for, and the advice to act on both.
What the report does for you
Numbers that hold up in the room where the decision is made.
Regulatory
Report inputs for Sindh EPA and Punjab EPA pathways
Results referenced to SEQS, PEQS or NEQS as the submission requires, with the method and limit stated beside every value, so the document can be read by a regulator without a covering explanation.
Commercial
Buyer and export audits
Effluent, discharge and workplace results in the form brand compliance teams ask for.
Operational
Process and utility checks
RO performance, boiler and cooling water, and plant troubleshooting on a repeat schedule.
Assurance
Reviewed before release
Results are checked against the method and the specified limit before the report is issued.
Verification
Check any report in seconds
Enter the report number and issue date on the verification portal and the record is confirmed from the laboratory system.
Open the portalHow a request runs
A controlled path from question to usable report.
Each request begins by clarifying the decision you need to make. The technical work is then matched to that decision, not the other way round.
Start a request-
01
Scope
Confirm objective, sample or site context, city, timeline, parameters, and final report user.
-
02
Execute
Carry out sampling, testing, monitoring, calibration, inspection, or advisory work with controlled documentation.
-
03
Report
Deliver results and context that can be used by customers, auditors, regulators, and internal teams.
Before you request a quotation
Questions we are asked most.
What analytical laboratory services does Envi Tech AL provide?
Envi Tech AL supports environmental laboratory analysis for water, wastewater, air, emissions, soil, waste, and industrial samples where the final report must support compliance, audit, or operational decisions.
Can analytical lab reports support EPA submissions?
Reports can support EPA-related pathways when the scope, parameters, sampling plan, and report purpose are confirmed before analysis begins.
Do you provide analytical lab services in Karachi and Lahore?
Yes. Envi Tech AL supports Karachi/Sindh and Lahore/Punjab clients through laboratory, field, and advisory coordination.
Ready to scope the work?